Super Column Germany Siemens CNC Tapping Machine Wider Saddle
Design,
Super Size Column CNC Tapping Machine:
CNC Tapping Machine has directly-connected Spindle with High
Efficiency, and Without Belt Drive Error
CNC Tapping Machine has16T or 21T Magazine with Fast Tool Change
Super-size Column without Deformation at Traverse Speed 60m/min
Super-wide Base with 6-point Support: No Vibration and No
Deformation
X/Y/Z Traverse Speed: 60m/min: High Speed and Time Saving
CNC Tapping Machine Low Inertia Spindle Design: High Stability,
Fast and Precise Tool Change:2.0S; Also Can be Used for Small
Diameter Hole Processing
High Efficient AC Servo Motor and Man-machine Interaction for Easy
Operation
CNC Tapping Machine Axis CNC Machining Center has been through
complete FEM analysis, which ensures high rigidity and precision.
The symmetric cast iron frame has good effect on minimizing thermal
deformation. Stable precision machining and accurate positioning
machining can be easy achieved.
Super Size Column CNC Tapping Machine Core Components:
● Japan Mitsubishi, Fanuc or Germany Siemens CNC control system
● Japan Mitsubishi, Fanuc or Siemens spindle motor, 3 axes motor
● Taiwan Famous Brand Spindle
● Taiwan HIWIN and PMI Guideway and Ball Screw
● Taiwan Famous Brand 24T Arm Type Tool Magazine
● Japan NSK Bearings
Taesin CNC Tapping Machine Inspection and Acceptance:
1. Acceptance Standard: According to the technical requirement and
parameter.
2. Inspection and Acceptance Requirement:
2.1 Inspection and acceptance can be done after testing in
manufacturer’s factory. Geometric and positioning accuracy
inspection, and do machining on spot. Make sure the processing
accuracy and range meet technical requirement. Machine can be
delivered after both of seller and buyer sign.
2.2 Inspection Result: According to final inspection and acceptance
Super Size Column CNC Tapping Machine Technical Data:
| Technical Data | T5 | T6 |
| X/Y/Z Axis Travel mm | 500/400/300 | 800/500/500 |
| Working Table Size mm | 400*650 | 700*420 |
| Max Load (KG) | 250 | 250 |
| Spindle Tool to Working Table mm | 150-450
| 150-450
|
| T-slot | 3-14*100 | 3-14*125 |
| Rapid Traverse Speed m/min | 60 | 60 |
| Cutting Feed Rate mm/minute | 1-12000 | 1-12000 |
| Spindle Motor KW | 5.5 | 5.5 |
| Spindle Speed rpm | 20000 | 20000 |
| Positioning Accuracy mm | ±0.003/300 | ±0.003/300 |
| Repeated Positioning Accuracy | ± 0.0025mm | ± 0.0025mm |
| Weight kg | 3000 | 4000 |
| Size mm | 1900*2700*2400 | 2300*2900*2500 |
